Hobby-Lobby
ERATIX 3D 25E ARF
| Radio System | 6+ channels |
| Servo | 4 mini metal gear servos |
| Motor | Power 25 or Power 32 motor |
| Speed Control | 60-amp ESC |
| Prop | 13 x 6.5E, 14 x 7E or 15 x 8E, depending upon the motor selected |
| Battery | 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po |
| CG (center of gravity) | 3.75 - 4 in (80 - 100mm) from leading edge |
| Control Throw (Ailerons) | High Rate |
| Control Throw (Elevator) | High Rate |
| Control Throw (Rudder) | High Rate |
| Experience Level | Intermediate |
| Flying Weight | 3.75 - 4 lb (1.7 - 1.8 kg) |
| Fuel Type | Electric |
| Hardware Included | Yes |
| Motor Size | Power 25 or 32 required |
| Overall Length | 53 in (1350mm) |
| Plane Type | Aerobatic & 3D |
| Power Plant Size | 25-52 Electric |
| Prop Size | 13 x 6.5E 14 x 7E or 15 x 8E depending upon which recommended setup you choose |
| Radio | 6+ channels |
| Recommended Battery | 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po (THP42003S2PPL or THP38504SX) |
| Recommended Environment | Outdoor |
| Servos | 4 metal-gear minis |
| Speed Control | 60A ESC (EFLA1060) |
| Spinner Size | 2.5" |
| Wing Area | 695 sq in (44.9 sq dm) |
| Wingspan | 54 in (1370mm) |
Key Features:, Capable of sport-to-extreme 3D aerobatics, Needed To Complete:, In order to get your Eratix 3D 25e ARF airborne, you will need the following items:, Technical Specifications:, Trim Scheme Colors: UltraCote Lite White (HANU973) Safety Orange (HANU892) Fluorescent Blue (HANU896) and Clear (HANU964),
Eratix 3D 25e ARF The E-flite® Eratix™ 3D 25e ARF ...RCPlanet
DUBRO 1-1/4" 32MM ELECTRIC SPINNER WHITE DUB960
, Spinner Diameter:, 1.25" (32mm), Spinner Backplate Thickness:, .23" (6mm), Prop Shaft diameter:, .196" (5mm), ,
DuBro electric spinner is a super lightweight plastic spinner. Aluminum ...RCPlanet
COX HOBBIES PROPELLER/SPINNER SET SKY RANGER EP COXQ5819
, Prop Diameter:, 4.25" (107.95mm), Spinner Diameter:, 0.59" (15mm), Spinner Height:, 0.73" (18.5mm) without mounting piece, ,
Cox prop and spinner set for the Cox Models Sky ...RCPlanet
COX HOBBIES PROPELLER/SPINNER SET EXTRA 300 EP COXQ5808
, Prop Diameter:, 4.25 inches (107.95mm), Spinner Diameter:, 0.87 inches (22mm), Spinner Height:, 1.04 inches (26.5mm) without mounting piece, ,
This is the Cox Hobbies Propeller and Spinner Set. This ...HiModel
SY 16X8 INCH NYLON 3-BLADE PROPELLER (SUIT FOR 26CC PETROL ENGINE)
| Diameter | 16 inch |
| Pitch | 8 inch |
| Weight | 106.7g / 3.76oz |
| Hub Thickness | 19.7 mm |
| Engine shaft hole | 8mm |
, , , , , , Specifications:, , , , , , , , , , , 3-Blade Nylon prop for 26CC petrol engine, , ,
Includes/Requires: Includes:1 x 3-blade propSDSHobby
NEW CRRC GP50R 50CC GASOLINE ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 50.8CC, Bore x Stroke:, 43mm× 35mm, Carburetor:, Walbro (Diaphragm & Butterfly Valve), Max. Output:, 5.4PSps/7800rmp, RPM Range:, 1300-7600rpm, Weight:, 1888g, Ignition Power:, DC 4.8 Volts (4 cells Ni-Cd or Ni-MH battery, ensure battery have max electric currency of 0.5A or use 5V stable power supply), Fuel Mixture (Ratio of gasoline and oil):, 5-35 : 1, Propeller:, 2X8, 22X10, 23X8, 24X6 (2-blade prop.), Advantages:, Package Included:,
(Including CDI and Muffler) CNC machined crankcase New designed crankcase's ...SDSHobby
SKYBUS 2.4G EPO FOAM PLANE (WHITE) READY TO FLY RIGHT HAND THROTTLE BRUSHLESS VERSION
| Material | EPO |
| Wing span | 1470mm |
| Total Length | 980mm |
| Wing area | 24.6d |
| Wing loading | 48.8g/ d |
| Flying weight | 1200g |
| Battery | 11.1V 2200mah 15C Lipo battery |
| Servo | 4 pcs* 9g |
| ESC | 30A*2 |
| Brushless outrunner motor | KV1100*2 |
| N.W.(KGS) | 4.2 |
| G.W.(KGS) | 4.8 |
| CTN SIZE (cm) | 98.5*50*61.5 (the carton size is for 3 pcs/ctn) |
Specifications:, Package contents:, Description:, This is DC-3 Skybus large scale EPO old style electric twin engine airplane from Dynam with 1470mm Wing span. The airplane has very nice Scale-Look and details. It has two preinstalled powerful brushless motor and 2-Blad Prop. All servos, Receiver and ESC are preinstalled from the Factory. The surface of the EPO material is extremely flat and rare. The complete model is made BY EPO which is very hard and the most crash-resistance material. The airplane is equipped with two powerful brushless motor and two 40 Amp ECS which give the model extra power and flight time. Its wide wingspan makes the model stable in the air with long glide-ratio. This model is suitable for intermediate to advanced pilots. The building time is around 45 min., Note:,
㎡ ㎡ .4g RC 4channel right Hand Throttle Charger, adapter ...SDSHobby
SKYBUS 2.4G EPO FOAM PLANE (WHITE) READY TO FLY LEFT HAND THROTTLE BRUSHLESS VERSION
| Material | EPO |
| Wing span | 1470mm |
| Total Length | 980mm |
| Wing area | 24.6d |
| Wing loading | 48.8g/ d |
| Flying weight | 1200g |
| Battery | 11.1V 2200mah 15C Lipo battery |
| Servo | 4 pcs* 9g |
| ESC | 30A*2 |
| Brushless outrunner motor | KV1100*2 |
| N.W.(KGS) | 4.2 |
| G.W.(KGS) | 4.8 |
| CTN SIZE (cm) | 98.5*50*61.5 (the carton size is for 3 pcs/ctn) |
Specifications:, Package contents:, Description:, This is DC-3 Skybus large scale EPO old style electric twin engine airplane from Dynam with 1470mm Wing span. The airplane has very nice Scale-Look and details. It has two preinstalled powerful brushless motor and 2-Blad Prop. All servos, Receiver and ESC are preinstalled from the Factory. The surface of the EPO material is extremely flat and rare. The complete model is made BY EPO which is very hard and the most crash-resistance material. The airplane is equipped with two powerful brushless motor and two 40 Amp ECS which give the model extra power and flight time. Its wide wingspan makes the model stable in the air with long glide-ratio. This model is suitable for intermediate to advanced pilots. The building time is around 45 min., Note:,
㎡ ㎡ .4g RC 4channel left Hand Throttle Charger, adapter ...SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 4.75*4.75E FOR MOTOR
| Pitch | 4.75 inch |
| Recommended Motor | 1406-KV2600(1-2S Lipo) |
| Bore Inner Diameter | ¢6.3mm |
| Outer Diameter of Washer | ¢7.62mm |
| Height of Prop Bottom | 6.8mm |
| Net Weight | 4.2g/0.15oz |
| Suitable for the Following Motor Shaft Diameters | ¢2mm, ¢3mm, ¢3.175 mm, ¢4mm, ¢5mm, ¢6mm (the above 6 prop washers included) |
SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 30*20E FOR MOTOR
| Pitch | 20 inch |
| Recommended Motor | 80100-KV180/KV130 |
| Bore Inner Diameter | ¢10mm |
| Height of Prop Bottom | 37.5mm |
| Net Weight | 456g/16.1oz |
SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 24*12E FOR MOTOR
| Pitch | 12 inch |
| Recommended Motor | N6374-200(4-10S Lipo) |
| Bore Inner Diameter | ¢10mm |
| Outer Diameter of Washer | ¢12.7mm |
| Height of Prop Bottom | 21.6mm |
| Net Weight | 160g / 5.6oz |
| Suitable for the Following Motor Shaft Diameters | ¢4mm, ¢5mm, ¢6mm, ¢6.35mm, ¢8mm, ¢9.52mm, ¢10mm (the above 7 prop washers included) |
SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 22*12E FOR MOTOR
| Pitch | 12 inch |
| Recommended Motor | N6374-KV200, N6374-KV170 (4-10S Lipo) |
| Bore Inner Diameter | ¢12mm |
| Outer Diameter of Washer | ¢14mm |
| Height of Prop Bottom | 21.2mm |
| Net Weight | 134g / 4.73oz |
| Suitable for the Following Motor Shaft Diameters | ¢6mm, ¢6.35mm, ¢8mm, ¢9.53mm, ¢10mm(the above 5 prop washers included) |
SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 20*12E FOR MOTOR
| Pitch | 12 inch |
| Recommended Motor | N6364-KV230(4-10S Lipo) |
| Bore Inner Diameter | ¢10.5mm |
| Outer Diameter of Washer | ¢12.7mm |
| Height of Prop Bottom | 21.1mm |
| Net Weight | 113.5g / 4.01oz |
| Suitable for the Following Motor Shaft Diameters | ¢4mm, ¢5mm, ¢6mm, ¢6.35mm, ¢8mm, ¢9.52mm, ¢10mm (the above 7 prop washers included) |
SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 19*10E FOR MOTOR
| Pitch | 10 inch |
| Recommended Motor | N6354-KV200(4-10S Lipo) |
| Bore Inner Diameter | ¢10.5mm |
| Outer Diameter of Washer | ¢12.7mm |
| Height of Prop Bottom | 20.5mm |
| Net Weight | 101.5g / 3.59oz |
| Suitable for the Following Motor Shaft Diameters | ¢4mm, ¢5mm, ¢6mm, ¢6.35mm, ¢8mm, ¢9.52mm, ¢10mm (the above 7 prop washers included) |
SDSHobby
EMP COMPOSITE ELECTRIC PROPELLER 18*12E FOR MOTOR
| Pitch | 12 inch |
| Recommended Motor | N6354-KV200(4-10S Lipo) |
| Bore Inner Diameter | ¢10mm |
| Outer Diameter of Washer | ¢12.7mm |
| Height of Prop Bottom | 21mm |
| Net Weight | 107g / 3.77oz |
| Suitable for the Following Motor Shaft Diameters | ¢4mm, ¢5mm, ¢6mm, ¢6.35mm, ¢8mm, ¢9.52mm, ¢10mm (the above 7 prop washers included) |